Every algorithm has the opportunity to write out a small report into the L2Result array after each decision(). The sizes of these results are fixed within a year so that they don't overwrite others unexpectedly. They should not be changed without talking to the L2 algorithm maintainer. The starting position for each is defined in terms of the offset from the start of the L2Array. The values during the run were as follows:
Algorith | Offset |
(EMC_CHECK) | 1 |
EMC_PED | 2 |
Barrel Gamma | 3 |
Endcap Gamma | 6 |
Dijet | 9 |
Upsilon | 17 |
Barrel W | 20 |
Dijet (Higher Et) | 25 |
Endcap Hien | 0 |
Barrel Calib | 0 |
Endcap Calib | 0 |
Barrel Hien | 0 (C2Result) |