2009.10.26 Jason vs. CVS EEMC: removed SMD layers

Monte-Carlo setup:

• One photon per event
• Disabled new SMD layers (EXPS EBLS EFLS) in Jason geometry
• EEMC only and Full STAR geometry configurations with LOW_EM option
  Note: LOW_EM option seems not to work for EEMC only configuration (double checking)
  (using Victor's geometry fix)
• Throw particles flat in eta (1.08, 2.0), phi (0, 2pi), and pt (6-10 GeV)
• Using A2Emaker to get reconstructed Tower/SMD energy
  (no EEMC SlowSimulator in chain)
• Vertex z=0
• ~50K/per particle type
• Non-zero energy: 3 sigma above pedestal

Geometry configurations and notations (shown in the center of the plot):

1. eemc-cvs: EEMC only with geometry file from CVS (cAir-fixed)
2. full-cvs: Full STAR with geometry file from CVS (cAir-fixed)
3. eemc-j-noL: EEMC only with Jason geometry file (disabled 3-new SMD layers)
4. full-j-noL: Full STAR with Jason geometry file (disabled 3-new SMD layers)

Figure 1: number of post-shower tiles

Figure 2: number of pre-1-shower tiles

Figure 3: number of pre-2-shower tiles

Figure 4: number of towers

2D

Figure 5: Average pre-shower1 energy

Figure 6: Average pre-shower2 energy

Figure 7: Average number of SMD-u strips

Figure 8: Average number of SMD-v strips

Figure 9: Average post-shower energy

Sampling fraction

Figure 10: Sampling fraction 1x1 vs. thrown energy

Figure 11: Sampling fraction 2x1 vs. thrown energy

Figure 12: Sampling fraction 3x3 vs. thrown energy

Figure 13: Sampling fraction (total energy) vs. thrown energy

Figure 14: Sampling fraction 1x1

Figure 15: Sampling fraction 2x1

Figure 16: Sampling fraction 3x3

SMD shower shapes

Figure 17: SMD shower shape (v-plane)