Snapshot factory consists of three scripts (bash+php), located at omega.star.bnl.gov. Those scripts are attached to cron, so snapshots are produced four times per day at 6:00, 12:00, 18:00, 24:00 respectively. Those snapshots are exposed to outer world by special script, located at STAR web server (orion), which allows single-stream downloads of snapshot archive file (lock-file protection) to avoid www overload.
1. omega.star.bnl.gov :
- primary script is /db01/offline_snapshot_copy/scripts/run, which is started four times per day by /etc/cron.d/db-snapshot.sh cron rule;
- resulting file is copied to /var/www/html/factory/snapshot-2010.tgz, to be served to orion via http means;
- each (un)successful snapshot run sends an email to arkhipkin@bnl.gov, so database administrator is always aware on how things are going;
- run script is protected against multiple running instances (lock file + bash signal traps), thus preventing build-up of failed script instances at omega;
2. orion.star.bnl.gov :
- snapshot download script is located at /var/www/html/dsfactory/tmp/get_snapshot.sh, which is started every hour by /etc/cron.d/db-snapshot-factory cron rule;
- get_snapshot.sh is also protected against multiple running instances, + it will not download same file twice (if no changes since last download), thus conserving network traffic and keepin node load low;
- resulting file - actual database snapshot - could be accessed at http://drupal.star.bnl.gov/dsfactory/ link, which has internal protection against multiple downloads: only 1 download stream is allowed, other clients will receive HTTP 503 error, accompanied by explanations message (busy);
The following bash script could be used to safely download database snapshot :
#!/bin/bash
#
# Database snapshot download script (omega to orion)
# If you need help with this script, please contact
# "Dmitry Arkhipkin" <arkhipkin@bnl.gov>
#
set -u
set +e
# defaults
lockfile=/tmp/db-snapshot-factory.lock
EMAILMESSAGE=/tmp/emailmessage.txt
DOWNLOAD_DIR=http://www.star.bnl.gov/dsfactory
DOWNLOAD_FILE=snapshot-2010.tgz
LOCAL_DIR=/tmp/dsfactory
LOCAL_TMP_DIR=/tmp/dsfactory/tmp
LOCAL_NAME=db-snapshot-2010.tgz
SUBJECT="gridified database snapshot 2010 download completed"
EMAIL=arkhipkin@bnl.gov
if ( set -o noclobber; echo "$$" > "$lockfile") 2> /dev/null;
then
trap '/bin/rm -f "$lockfile"; exit $?' INT TERM EXIT
# protected area starts here :
cd $LOCAL_TMP_DIR
echo "This is an automated email message, please do not reply to it!" > $EMAILMESSAGE
START=$(date +%s)
echo "*** database snapshot update started at" `date` >> $EMAILMESSAGE
# Attempt to download the file. --progress=dot:mega is used to prevent
# WGET_OUTPUT from getting too long.
WGET_OUTPUT=$(2>&1 wget -O $DOWNLOAD_FILE --timestamping --progress=dot:mega \
"$DOWNLOAD_DIR/")
# Make sure the download went okay.
if [ $? -ne 0 ]
then
# wget had problems.
# send "FAILED" notification email
echo "*** wget output: $WGET_OUTPUT" >> $EMAILMESSAGE
SUBJECT="gridified database snapshot 2010 download FAILED"
/bin/mail -s "$SUBJECT" "$EMAIL" < $EMAILMESSAGE
echo 1>&2 $0: "$WGET_OUTPUT" Exiting.
exit 1
fi
# Copy the file to the new name if necessary.
if echo "$WGET_OUTPUT" | /bin/fgrep 'saved' &> /dev/null
then
/bin/cp -f "$LOCAL_TMP_DIR/$DOWNLOAD_FILE" "$LOCAL_DIR/$LOCAL_NAME"
# calculate time
END=$(date +%s)
DIFF=$(( $END - $START ))
HRS=$(( $DIFF / 3600 ))
MNT=$(( $DIFF % 3600 / 60 ))
SEC=$(( $DIFF % 3600 % 60 ))
echo "*** database snapshot download took $HRS:$MNT:$SEC HH:MM:SS to complete (TOTAL: $DIFF seconds)" >> $EMAILMESSAGE
# send "SUCCESSFUL" notification email
echo "*** database snapshot $LOCAL_NAME successfully updated." >> $EMAILMESSAGE
/bin/mail -s "$SUBJECT" "$EMAIL" < $EMAILMESSAGE
else
echo "!!! database snapshot $LOCAL_NAME does not need to be updated - same file." >> $EMAILMESSAGE
fi
# end of protected area
/bin/rm -f "$lockfile"
trap - INT TERM EXIT
else
echo "Failed to acquire lockfile: $lockfile."
echo "Held by $(cat $lockfile)"
fi
# end of script