Other databases created for the 2015 reconstructions


1.  Calibrations/pp2pp/pp2ppPMTSkewConstants


There are 64 Skew constants, as there are 4 constants for each PMT's and there are 2 PMT's for each of the 8 RP's.

Rafal's prescription:

Constants in set1.* contain parameters for runs 
16085056, 16085057 and >=16090042
Constants in set0.* contain parameters for all other runs.


Implementations:

1st set:

set0.*  entered at  "2015-01-01 00:00:01 GMT"

2nd set:

"RTS Stop Time" for 16085055 was "2015-03-26 23:05:04 GMT"
"RTS Start Time" for 16085056 was "2015-03-26 23:06:39 GMT"

set1.*  entered at  "2015-03-26 23:05:05 GMT"


3rd set:

"RTS Stop Time" for 16085057 was "2015-03-27 00:07:59 GMT"
"RTS Start Time" for 16085058 was " 2015-03-27 00:14:32 GMT"

set0.*  entered at  "2015-03-27 00:08:00 GMT"


4th set:

"RTS Stop Time" for 16090041 was "2015-03-31 22:38:57 GMT"
"RTS Start Time" for 16090042 was "2015-03-31 22:39:59 GMT"

set1.*  entered at  "2015-03-31 22:38:58 GMT"


2.  Geometry/pp2pp/pp2ppAcceleratorParameters


The order of entries in each set is:

x_IP  y_IP  z_IP  theta_x_tilt  theta_y_tilt  distancefromDX_east  distancefromDX_west LDX_east  LDX_west  bendingAngle_east  bendingAngle_west conversion_TAC_time

Entries entered :
"2015-01-01 00:00:01 GMT" :  0 0 0  0 0  9.8 9.8  3.7 3.7  0.018832292 0.018826657  1.8e-11

"2015-04-28 00:00:01 GMT" :  0 0 0  -0.003640421 0 9.8 9.8 3.7 3.7  0.011238936  0.026444185 1.8e-11
( The pp run stopped on Apr. 27 and there were a few days before C-AD could switch from pp to pAu operationally.  I picked the beginning of Apr. 28 for this pAu entry.)

"2015-06-08 15:00:00 GMT" :  0 0 0  -0.002945545 0 9.8 9.8 3.7 3.7  0.012693812  0.025021968 1.8e-11
( The last *pAu* run was 16159025 on June 8 and the first *pAl* run was 16159030 which was a bad run and started at "2015-06-08 15:44:13 GMT".  The previous run --- a pedestal run, 16159029, ended at "2015-06-08 14:24:54 GMT".  So I arbitrarily selected the above time kind of in the middle. )