Home » SubSystems

TOF

VPD Operations (HV Scan Instructions)

Updated on Sun, 2024-04-21 16:06. Originally created by geurts on 2023-05-19 12:30. Under:

[from Isaac Upsal's instructions to star-ops, dd.May 17, 2023]

»

Run 21 Calibrations

Updated on Thu, 2023-10-26 12:33. Originally created by cj17 on 2022-05-16 18:06. Under:

 

Run21 Calibrations

AuAu 7.7 GeV Calibrations

  • VPD Calibration QA
  • BTOF alignment 
    • xqa
»

BTOF Electronics

Updated on Fri, 2021-01-29 11:14. Originally created by geurts on 2021-01-29 11:14. Under:

 Barrel Time-of-Flight Electronics

  1. Overview
    1. Tray Mappings (incl.
»

BTOF Electronics

Updated on Fri, 2021-01-29 11:14. Originally created by geurts on 2021-01-29 11:14. Under:

 Barrel Time-of-Flight Electronics

  1. Overview
    1. Tray Mappings (incl.
»

Run20 TOF and MTD operation instruction documents

Updated on Wed, 2020-08-12 09:58. Originally created by geurts on 2020-08-12 08:47. Under:

This page summarizes all the documents for the BTOF and MTD operation during Run 20.

Attached files:

  • version 1/6/20 by Zaochen Ye

Know issues:

»

Run 17 calibrations

Updated on Mon, 2020-02-03 14:34. Originally created by geurts on 2020-02-03 14:34. Under:

 Run 17 Calibrations

BTOF Simulations

Updated on Mon, 2020-02-03 13:16. Originally created by geurts on 2020-02-03 13:16. Under:

 

BTOF Hardware

Updated on Mon, 2021-08-30 15:59. Originally created by geurts on 2020-02-03 13:01. Under:

 BTOF Hardware & Electronics

  • Bad Tray History (Aug.
»

TOF/VPD Calibration How-To's

Updated on Tue, 2023-10-03 09:46 by zye20. Originally created by geurts on 2019-01-23 10:18. Under:

 

test

Updated on Mon, 2019-01-21 15:18. Originally created by zye20 on 2019-01-21 15:18. Under:

 

TOF noise rate pattern

Updated on Fri, 2023-06-02 09:40 by geurts. Originally created by eppley on 2018-07-11 14:55. Under:

BTOF and MTD noise patterns are determined from dedicated TOF noise runs.

»

TOF noise rate pattern

Updated on Thu, 2018-10-11 16:20 by fseck. Originally created by eppley on 2018-07-11 14:51. Under:

 

TOF Simulation Resolution Database

Updated on Mon, 2020-02-03 13:16 by geurts. Originally created by jdb on 2017-12-15 10:33. Under:
 Variables:
    unsigned short resolution[23040]; // The BTOF time resolution for a given cell used in simulation.
»

Run 16 TOF+MTD Operations Documents

Updated on Fri, 2018-03-02 15:33 by tlusty. Originally created by sbutter on 2016-03-15 15:02. Under:

This page holds TOF and MTD operations documents used during Run-16. Previous versions and possibly current versions may be found on Run-15's equivalent page.

»

A1534s (HV Supply Boards)

Updated on Fri, 2016-03-04 14:02. Originally created by sbutter on 2016-03-04 14:02. Under:

The A1534 is the HV Supply board that is inserted into our SY1527(MTD:SY4527 ).

Currently used boards(03/01/2016) for TOF + MTD: serial number and firmware version

TOF(counting from 0):

»

TOF HV Hardware

Updated on Mon, 2020-02-03 13:01 by geurts. Originally created by sbutter on 2016-03-04 13:52. Under:

This page is intended to host information about TOF's high voltage equipment.

VPD Slewing corrections for bbq & mxq

Updated on Wed, 2019-01-23 10:21 by geurts. Originally created by jdb on 2015-05-07 10:56. Under:

 

1. Acquiring VPD gain setting data

»

Run 15 TOF+MTD Operations Documents

Updated on Mon, 2015-04-13 16:22. Originally created by sbutter on 2015-01-16 10:35. Under:

Run 15 TOF + MTD Operations Documents

 

»

Trigger Window Determination

Updated on Wed, 2019-01-23 10:21 by geurts. Originally created by sbutter on 2012-02-06 12:46. Under:

Here is documentation on how to determine the trigger windows for ToFs 120 trays and the 2 start detectors.

»

Run 11 - 19 GeV Calibration

Updated on Fri, 2011-06-17 15:58. Originally created by sbutter on 2011-06-17 15:58. Under:

Place holder.  Board+cell based calibration.