unknown
W 2009 analysis , pp 500 GeV
Updated on Fri, 2013-06-21 21:18. Originally created by balewski on 2009-03-19 09:10. Under:Progress of 2009 data analysis for W measurement
mktxt2005.txt
Updated on Wed, 2009-03-18 18:22. Originally created by genevb on 2009-03-18 18:22. Under:#!/bin/csh set sdir = ./StarDb/Calibrations/rhic set tdir = ./txt set files = `ls -1 $sdir/*.C` set vs = (x0 err_x0 y0 err_y0 dxdz err_dxdz dydz err_dydz stats) set len = 0
queryNevtsPerRun.txt
Updated on Wed, 2009-03-18 18:17. Originally created by genevb on 2009-03-18 18:17. Under:-- N evts per run, where N is the numerator at the end of the last line select floor(bi.blueFillNumber) as fill, sum(ts.numberOfEvents/ds.numberOfFiles) as gdEvtPerFile,
Y2008a
Updated on Wed, 2009-03-25 12:33. Originally created by perev on 2009-03-17 17:21. Under:y2008a full and TPC only material histograms
03 study of 2009 slopes (jan)
Updated on Tue, 2009-06-16 13:33 by mattheww. Originally created by balewski on 2009-03-11 14:05. Under:Purpose of this study is to evaluate how successful was our firts attempt to compute new 2009 HV for BTOW.
Short answer: we undershoot
Run 8 BPRS Calibration
Updated on Tue, 2009-03-10 14:32. Originally created by mattheww on 2009-03-10 14:32. Under:Parent for Run 8 BPRS Calibration done mostly by Jan
Preliminary Cross Section Plot
The proposed final version of the cross section plot would look like this.
Run 9 BPRS Calibration
Updated on Tue, 2009-03-10 14:19. Originally created by mattheww on 2009-03-10 14:19. Under:Parent for Run 9 BPRS Calibration
0) lastDSM masks
Updated on Mon, 2009-03-09 14:57. Originally created by rcorliss on 2009-03-09 14:57. Under:In order to accommodate the larger number of desired triggers in the old TCU, the following algorithms can now read in masks to be checked against the 128 lastDSM input bits before decision() is ca
P08id (Omega -> RecoPiMinus)
Updated on Sun, 2009-03-08 22:27. Originally created by starembed on 2009-03-08 20:07. Under:Omega-> Lamba + K - -> P + Pion - + K -
P08id (AXi -> RecoPiPlus)
Updated on Sun, 2009-03-08 20:01. Originally created by starembed on 2009-03-08 20:01. Under:AXi-> Lamba + Pion + ->P + Pion - + Pion +
P08id(Xi -> Reco(PiMinus)
Updated on Sun, 2009-03-08 19:46. Originally created by starembed on 2009-03-08 19:45. Under:Xi-> Lamba + Pion - ->P + Pion - + Pion -
P08id(ALambda -> P, Pion)
Updated on Sun, 2009-03-08 22:31. Originally created by starembed on 2009-03-08 17:36. Under:
QA ALambda->P, pi (03 08 2009)
01 BTOW HV Mapping
Updated on Tue, 2009-03-17 17:45. Originally created by mattheww on 2009-03-06 17:17. Under:We started at the beginning of the run to verify the mapping between the HV cell Id and the softId it corresponds to.
xxxxxxx old xxxxxx
Updated on Fri, 2009-03-20 14:19. Originally created by balewski on 2009-03-06 16:19. Under:SPARE PAGE
g) L2upsilonAlgo (barrel upsilon algorithm)
Updated on Fri, 2009-03-06 14:55. Originally created by rcorliss on 2009-03-06 14:55. Under:This algorithm searches for upsilons in the barrel, and will not run if BTOW is not in the run.
This algorithm reads in 1 int from run control:
f) L2pedAlgo (barrel and endcap pedestal monitor)
Updated on Fri, 2009-03-06 15:13. Originally created by rcorliss on 2009-03-06 12:20. Under:This algorithm records the ADC values from the ETOW and BTOW for pedestal studies.
This algorithm reads in 5 ints from run control:
[i0] ped subtraction flag
[i1] speed factor
e) L2jetAlgo (barrel and endcap combined jet algorithm)
Updated on Fri, 2009-03-06 09:56. Originally created by rcorliss on 2009-03-06 09:56. Under:This algorithm searches for jet-like energy distributions in the barrel and endcap calorimeters, and will run even if one or the other is not in the run.
P08id (phi ->KK) (March 05 2009)
Updated on Thu, 2009-03-05 23:43. Originally created by starembed on 2009-03-05 22:42. Under:
QA Phi->KK (March 05 2009)
d) L2hienAlgo (passive barrel and endcap high tower filter)
Updated on Thu, 2009-03-05 15:07. Originally created by rcorliss on 2009-03-05 15:07. Under:This algorithm packages tower ADC values and soft IDs for use outside of L2. It always accepts, and in the current configuration is cannot be attached to a particular trigger, but rather runs