FullProduction_run2013

 Two sets of production

reason:( TPC calibration after day 128 will still take some time since we rely on the HFT dead material modeling to be finished, which has not been finished yet.)

set 1: before day128
set 2 : after day 128

production criteria:

Step 1: Make ‘production request’ for period 1 now with presentation to SPIN PWG on Thursday, January 23

Step 2: Make ‘embedding request’ for period 1 after approval of Step 1

—> First internal analysis of period 1 by Devika and Jinlong for AL

Step 3: Prepare small test production once TPC calibration for Period 2 is available

Step 4: Make ‘production request’ for period 2

Step 5: Make ‘embedding request’ for period 2 after approval of Step 4

—> Analysis of period 2 by Devika and Jinlong for AL 

—> Prepare prelim. result of full Run 13 statistic of Period 1 and Period 2!

***********************************************************************************************************************************************************************

Run List Selection criteria
 
 

Criteria: step 1

Source:  http://online.star.bnl.gov/RunLogRun13/

Run Period Trg SetUP Magnetic Field  clock source # of runs runs excluded runs included(% to the all runs)
all all all all  11531    
pp @ 500 GeV all all all  11531    
pp @ 500 GeV Production trigges only all all  3625 7906  
pp @ 500 GeV Production trigges only all  RHIC clock  3624 7907  
pp @ 500 GeV  pp500_production_2013 +
pp500_production_2013_noendcap
 all  RHIC clock  2959+119=3078 546  
pp @ 500 GeV  pp500_production_2013 +
pp500_production_2013_noendcap
 Rff(B, -1)  RHIC clock  2937+119=3056 22  
             
             
             

 

runs which will exclude:

Run numbers affected by the luminosity scaler issues  [14120013 - 14120016] inclusive
reason:

( issue with slow controls communications at the experiment)

Runs that the TPC group has reported is not worth producing: [14126017  14129019] inclusive

reason: 

(For this range of runs, another communication failure prevented the TPC voltages from being recorded. This in particular prevents two things: (1) the use of dE/dx (gains are based on voltages), and (2) embedding (embedding depends on knowing the gains of TPC channels). While dE/dx isn't really important for the W analysis, the inability to embed is. This is unfortunately a larger chunk of data, which includes 46 of the runs from our "golden list".)

*******************************************************
runLists:

period1

productionRequestforPeriod1_spinPWG_talk