Following up from the previous post:

https://drupal.star.bnl.gov/STAR/blog/dmawxc/update-05182018-run-9-embedding-jet-reconstruction-efficiency-r-03-charged

Here is the jet reconstruction efficiency as calculated from the Run 9 dijet embedding using variable bins.  After discussion today, we decided to adjust the cuts being applied to the jets.  The cuts applied to particle-level jets are:

• |etaJet| < 0.7 
• |dFjet - pi| < pi/4

And the cuts applied to detector-level jets are:

• |etaJet| < 0.7
• areaJet > 0.2
• pTjet > 0.2 GeV/c
• |dFjet - pi| < pi/4

Where the 'pTjet' is, as before, the raw reconstructed jet 'pT' (no corrections) and 'dFjet' is calculated relative to the charged-hadron trigger.  Moreover, we decided to adjust our matching algorithm: before I required that matched jets satisfy 'pTdet/pTpar > 0.15' and 'pTdet/pTpar < 1.5', but this time I removed the upper limit ('pTpar' and 'pTdet' are the particle- and detector-level jet 'pT' respectively).

And with even finer bins:

Just like last time, I've attached the ROOT files in a zip file and all of the individual 'pTjet' (with no smearing) and efficiencies.