Vped scan March 26 2025

Summary from  March 27th noon:

We have  4 tiles with problems:
EW1 PP06 TT01 - simply dead
EW1 PP06 TT02 - shows nearly always mean 0
EW1 PP02 TT09 - mean 0 (non zero in camac off)
EW0 PP07 TT24 - always mean 0
================================================

I did a scan according to blog  but using pedestals like a year ago Mike's blog .
We took pedestal_rhicclock_clean runs with vped: -60, -40, -20, -10, 0, 10, 20, 40, and CAMAC off one.
We tried vped = 60 but we could not take the pedestal run.
Runs:

Vped Run number
-60 260805044
-40 260805045
-20 260805046
-10 260805047
0 260805048
10 260805049
20 260805050
40 260805051
CAMAC OFF 260805056

I ran Mike's code over the outputs and also looked at the pedestals individually.
The outputs are attached: Scan Results and multiple pdf corresponding to each pedestal run.
there are multiple channels with "problems", below is the table with some comments to each of them:

Eq Bd Ch EW PP TT Comment
EQ3 Bd 4 Ch 13 EW1 PP06 TT01 DEAD ! Since last year and in 7 pattern
EQ2 Bd 8 Ch 08 EW1 PP06 TT02 mean 0 (non zero in camac off)
EQ1 Bd 4 Ch 08 EW0 PP07 TT24 mean 0 - always!
EQ4 Bd 8 Ch 11 EW1 PP02 TT09 mean 0 (non zero in camac off)

Here is screen for EW1 PP06 TT02:

The new TUFFmap file is attached.