Request: 

The need are runs w and w/o magnet on, and with a rate for a vpd-10 trigger at ~60Hz. This probably corresponds to 1kHz ZDC rate, 
but could be a bit higher due to the hourglass effect. A good time to do this would be later this week, once we hit the low_settings since the need is about 3 hours total. It could be split over two stores if need be.

6/6 Current plan is to do it over two stores last 1.5 hours in each
The setup fiule is called
auau_200_lowluminosity_2014.
 It should essentailly include all detectors PXL,IST,SSD, TOF, TPX. Others can be left out if there is a problem.

Background material in the slides from XIN