Subsys-BEMC
BEMC modules with the beam pipe and cradles
Updated on Thu, 2007-10-18 19:45. Originally created by tai on 2007-10-18 19:42. Under:
Fiber Assembly Area (MSU)
Updated on Thu, 2007-10-18 19:12. Originally created by kocolosk on 2007-10-18 19:12. Under:
Fiber Cable Checker (MSU)
Updated on Thu, 2007-10-18 19:11. Originally created by kocolosk on 2007-10-18 19:11. Under:
Fiber Cable Quality Control (MSU)
Updated on Thu, 2007-10-18 19:08. Originally created by kocolosk on 2007-10-18 19:08. Under:
Fiber Cable Connectors (MSU)
Updated on Thu, 2007-10-18 19:07. Originally created by kocolosk on 2007-10-18 19:07. Under:
Fiber Cable Diamond Polisher, back view (MSU)
Updated on Thu, 2007-10-18 19:07. Originally created by kocolosk on 2007-10-18 19:07. Under:
Fiber Cable Diamond Polisher, front view (MSU)
Updated on Thu, 2007-10-18 19:06. Originally created by kocolosk on 2007-10-18 19:06. Under:
Fiber Cable Gluing Jig (MSU)
Updated on Thu, 2007-10-18 19:01. Originally created by kocolosk on 2007-10-18 19:01. Under:
Audio-Visual Center (1998 Test Beam)
Updated on Thu, 2007-10-18 18:16. Originally created by kocolosk on 2007-10-18 16:19. Under:
The audio visual center for taking movies of the installation of module-0.
Data Acquisition Electronics (1998 Test Beam)
Updated on Thu, 2007-10-18 18:16. Originally created by kocolosk on 2007-10-18 16:18. Under:
The data acquisition and electronics for Test Run 98. The system was up and running 2 hours after leaving the truck.
Back of Module-0 (1998 Test Beam)
Updated on Thu, 2007-10-18 18:17. Originally created by kocolosk on 2007-10-18 16:16. Under:
View of module-0 resting on the movable table looking upstream.
Front of Module-0 (1998 Test Beam)
Updated on Thu, 2007-10-18 18:17. Originally created by kocolosk on 2007-10-18 16:14. Under:
View of module-0 resting on the movable table. Visible are the markings for the 12 towers being calibrated.
Some of the Installation Team (1998 Test Beam)
Updated on Thu, 2007-10-18 18:18. Originally created by kocolosk on 2007-10-18 16:12. Under:
STAR EMC collaborators and AGS staff work to install module-0 at the AGS test beam.
Module Being Placed on Table (1998 Test Beam)
Updated on Thu, 2007-10-18 18:18. Originally created by kocolosk on 2007-10-18 16:10. Under:
Module being placed on the movable table at the B2 test beam facility.
Module hanging from crane on sling (1998 Test Beam)
Updated on Thu, 2007-10-18 18:19. Originally created by kocolosk on 2007-10-18 16:09. Under:
Module suspended by AGS crane being placed on the movable table at the B2 test beam facility.
Construction Photo of STAR showing BEMC Rails Being Aligned
Updated on Thu, 2007-10-18 16:21. Originally created by kocolosk on 2007-10-18 16:05. Under:
Construction photograph of STAR showing the alignment of the rails for the EMC.
Construction Photo of STAR showing BEMC Rails
Updated on Thu, 2007-10-18 16:21. Originally created by kocolosk on 2007-10-18 16:00. Under:
Construction photograph of STAR taken on May 28, 1998. Visible in the picture are the rails and supports for the STAR EMC.
Di-jet event in Barrel EMC from year < 2006
Updated on Thu, 2006-10-26 08:36. Originally created by kocolosk on 2006-10-26 08:36. Under: