Home » Groups » STAR Protected

Run 2013 Information

 The list of ehternet connected devices

 
IP East – 5 o’clock
IP West – 7 o’clock
Device
Name
IP Address
MAC Address
Name
IP Address
MAC Address
1Web Camera 1 (pot)
pp2pp-cam03
130.199.90.6
 
pp2pp-cam01
130.199.90.9
 
1Web Camera 2 (elec.)
pp2pp-cam04
130.199.90.7
 
pp2pp-cam02
130.199.90.22
 
1APC Power Switch
pp2pp-iboot01
130.199.90.26
00 C0 B7 C3 3E F1
pp2pp-iboot02
130.199.90.38
00 C0 B7 C3 3E F7
2NI GPIB-ENET/100
pp2pp-gpib01
130.199.90.47
00 80 2F  0A 0D 37
pp2pp-gpib02
130.199.90.51
00  80 2F  0A 03 7C 
2ADAM-ENET
pp2pp-adam01
130.199.90.43
00 DO C9 35 91 43
pp2pp-adam02
130.199.90.46
00 D0 C9 35 92 96
 3Hyper Terminal
pp2pp-star90
130.199.90.81
 
1007wdigi
130.199.90.120
 
 
 
 
 
 
 
 
2Slow Controls PC
pp2pp-slow
130.199.90.72
00 04 5A 62 95 76
 
 
 


1Name.bnl.gov

2Name.pp2pp.bnl.gov
3Name.c-ad.bnl.gov


Default routers = 130.199.90.24   ( 130.199.60.24 )

IP broadcast address = 130.199.91.255

IP subnet mask = 255.255.254.0

 

Site DNS server address =    130.199.1.1            130.199.128.31

Site WINS server address =   130.199.128.32      130.199.1.2

Installation and running of slow-server

List of additional software for installation

(It could also be required to install some missing packages from the system distribution like kernel-devel, sox etc.)
  1. National Instruments GPIB drivers. 
  2. Advantech ADAM 4570 driver.
  3. LabView for Linux.
  4. Configure GPIB devices using gpibexplorer (/usr/local/natinst/ni4882/bin/gpibexplorer in default instllation). IP addresses are listed above.
  5. Compile and install advantech driver. Copy configuration files from the attached advtty_conf.tgz to the proper directories:
  • 80-advtty.rules to /etc/udev/rules.d
  • advtty to /etc/init.d
  • advttyd.conf to /usr/local/advtty (for default installation) --- (KY: 2014-9-5) which contains the IP's for ADAM.
  1. Enable and start advttyd using system-config-services

Running of slow control

  1. Login as user daq.
  2. You may need to rebuild lv-pp2pp-slow.so library if the server IP changed. cd to pp2pp-slow, edit pp2pp-slow.h for the new IP and run make.
  3. Start the server if it was not running : pp2pp-slow-server &. It is assumed that we keep it running all the time.
  4. Start the LabView application lv-ppslow and press "Run continuously" button. Generally application could be run from a PC different from the server.
  5. In case of some configuration changes - edit the configuration file bin/pp2pp-slow.conf and restart the server either manually or using the LabView application.