Home »
Sort by:[Date]

RHICBOS Calculations - Input for Run 9 W analysis

Updated on Wed, 2010-02-03 08:18. Originally created by surrow on 2010-01-25 13:01.

 Documentation of RHICBOS Calculations for Run 9 W ana

Origin of Forward Pi0

Updated on Mon, 2010-02-01 15:53. Originally created by leun on 2010-01-25 12:20.

Origin of the Forward Pi0s in Pythia 6.22 and 6.4

 

BHT3 luminosities for feb. APS

Updated on Fri, 2010-01-22 15:05. Originally created by rcorliss on 2010-01-22 15:05.

Attached is the most recent version (4a, computed Jan21) of the luminosity table. In this version I'm using a fixed, eight-bin window for each of the two abort gaps.

Geometry Differential Framework v0.1

Updated on Thu, 2010-01-28 11:05. Originally created by jwebb on 2010-01-22 11:34.

STAR Baseline Analysis of the Simulation Environment

Produces a set of material differential plots for the STAR geometry.

Charge Seperated Background Subtracted Yields (verB5.2)

Updated on Fri, 2010-01-22 11:54. Originally created by stevens4 on 2010-01-21 22:45.

Charge Seperated Background Subtracted Yields (verB5.2)

AL for W+, W- from SL09g, Run 9, 1.46M events

Updated on Tue, 2010-01-26 16:38. Originally created by balewski on 2010-01-21 21:15.

 STAR W+ & W- have been extracted from pp500 data from run 9, SL09g production, with the W-algo ver B5.2 on January 21, 2010.

Correcting for kicked bunches in SBB calculation

Updated on Thu, 2010-01-21 14:56. Originally created by rcorliss on 2010-01-21 14:47.

 A problem that has been showing up in the luminosity tables recently is that the ratio of single beam background (SBB) events to total BHT3 events is surprisingly high, in some cases ~50%.

EIC Event Topology for eA and ep scattering

Updated on Thu, 2010-01-21 11:52. Originally created by surrow on 2010-01-21 11:52.

validating a flat background in the vernier scans

Updated on Thu, 2010-01-21 11:54. Originally created by rcorliss on 2010-01-21 02:39.

In response to the vernier scan analysis w

TOF HV standby currents

Updated on Wed, 2010-01-20 21:19. Originally created by bbiritz on 2010-01-20 21:19.

Hi All,

Geary asked me to take a look at the HV currents when TOF is in standby mode (i.e. HV = 5000 instead of 7000V).