Sort by:[Date]

Using StRandomSelector to Artificially Reduce Track Efficiency

In order to better estimate the error in the jet energy scales arising from Tpc efficiency error, we have been looking into the possibility of examining the effects of reducing jet efficiency artif

FHC transverse study summary

 

     I used the Zoffset for FHC is 850cm and 948cm.

absolute cross section notes 5

Here is the procedure I'm using to compute the absolute cross section:

 

Entry 2`

With the first couple getAllRuns_xxx.pl files completed, and the findBXoff.C run over them, it was time to begin analysis to ensure that everything was working just fine.

Linearity Check in fixed ecalgeo.g, take II

Abstract:  The EEMC geometry (ecalgeo.g) has been modified to remove a bug which resulted in approximately 1 radiation length of lead being inserted at the shower-maximum depth.  In this blog entry, the response of the modified geometry to various particles is determined over a range in energy from 0.5 to 200 GeV.  For photons we find that the linearity of the simulated EEMC sampling fraction is good to better than 1% over the range of energies studied.  Electrons above 2 GeV and neutral pions above 7 GeV exhibit similar linearities.

Linearity Check in fixed ecalgeo.g

Abstract:  A bug in the EEMC geometry has been identified.  Lines such as "Material Air isvol=0" have an unexpected (read undocumented) behavior: they create a new materi

Entry 1

Objective: to determine the Beam Crossing Offsets for all of the runs in the testSummaryClean.txt file and upload it to the SpinDB.

HFT CDR version 18

The HFT technical group have been working on this document for a while.

Comments are most welcome; The can be send to the Hans Georg editor of the document (HGritter @ lbl . gov )

Spin Task Force Meeting - 08/19/09

PPV 500 GeV test run QA

Code is at:

/star/u/rjreed/PPV2009/Eval500GeV03/

compiled in SL09b

Info to be filled in here....