Home »
Sort by:[Date]

Residuals in Run 20 FXT

Updated on Thu, 2024-04-11 15:12. Originally created by genevb on 2024-04-11 14:18.
I found a single DAQ file from Run 20 FXT already on disk and used it to generate TPC residuals via StiPulls using the commands listed further down this page.
»

energy dependence of pT correlators 3

Updated on Wed, 2024-04-10 16:32. Originally created by rutikmani on 2024-04-10 16:32.

 

»

Proton Purity Results at FXT Energies - Part 2

Updated on Tue, 2024-04-09 21:55. Originally created by cracz on 2024-04-09 21:34.
»

Vped scan vol 1 2024

Updated on Wed, 2024-04-10 19:47. Originally created by mstefaniak on 2024-04-09 16:27.

 I ran the vped scan with local clock:

based on https://drupal.star.bnl.gov/STAR/blog/mstefaniak/Vped-test-05052023
»

Collaboration Meeting Talk: Update and Planning

Updated on Tue, 2024-04-09 12:48. Originally created by bschaefer on 2024-04-09 12:48.

 

»

Changed channels and 7 Pattern final? (vol1)

Updated on Mon, 2024-04-08 22:25. Originally created by mstefaniak on 2024-04-05 16:58.

Summary:
We have 4 dead guys: W PP6TT1, E PP9TT15, W PP2TT10, E PP1TT31

»

Temperatures and dark currents in the EPD

Updated on Tue, 2025-03-25 21:21. Originally created by lisa on 2024-04-05 11:07.
Executive summary:  There is a significant correlation between higher SiPM dark currents in groups of tiles, and the temperature readings on the corresponding FEEs.  The tem
»

FST Meeting on 04/08/2024

Updated on Mon, 2024-04-08 11:51. Originally created by sunxuhit on 2024-04-05 00:33.

 Start: 2024-04-08 11:00 am

 
Timezone: America/New York
 
Meeting Agenda:
1. Xu Sun: FST NIM Status

»

Beginning of the run 2024: temperature and 7 pttern tests

Updated on Fri, 2024-04-05 11:24. Originally created by mstefaniak on 2024-04-04 20:11.

Summary:

a) Temperature: dark current probably does not generate that much heat. Reason for change from 18-28 not known.

b) 7Pattern test: 

»

Beginning of the run 2024: temperature and 7 pttern tests

Updated on Thu, 2024-04-04 20:06. Originally created by mstefaniak on 2024-04-04 20:06.

1. We installed West and then East EPD
2. Attached the fibre cables
3. Tight lighting test done

»