Home » SubSystems

EEMC

test child page control

Updated on Sat, 2018-12-08 10:16. Originally created by wwjacobs on 2018-12-08 10:16. Under:

Status and Pedestal Tables

Updated on Fri, 2017-06-30 08:53. Originally created by tinglin on 2017-06-09 10:55. Under:
RunList Selection:
»

Run 17 EEMC Calibrations

Updated on Fri, 2017-06-09 10:52. Originally created by tinglin on 2017-06-09 10:52. Under:

 

pp500 EEMC Gain Calibration with MIPs

Updated on Tue, 2016-11-08 13:36. Originally created by jhkwas on 2016-11-08 13:36. Under:

Note four sets of tower gains were uploaded to the database to account for gain decrease over the course of the run.

See attachments for calibration summary and masks lists.

»

Run 12 EEMC Calibrations

Updated on Tue, 2016-11-08 13:31. Originally created by jhkwas on 2016-11-08 13:31. Under:

EEMC Gain Calibration with MIPs

Updated on Tue, 2016-11-08 13:27. Originally created by jhkwas on 2016-11-08 13:27. Under:

Note four sets of tower gains were uploaded to the database to account for gain decrease over the course of the run.

See attachments for calibration summary and masks lists.

»

EEMC Tower Swaps

Updated on Tue, 2018-11-20 14:38. Originally created by tinglin on 2016-05-23 18:37. Under:

During the EEMC MIP calibration, we find that some of the EEMC cables are swaped.

»

Status and Pedestal Tables

Updated on Tue, 2015-11-24 12:05. Originally created by skoby on 2015-08-28 12:23. Under:

We used one good emc-check run with 100k events each for each fill.  Some fills did not have a good emc-check run.  Below are the runs we used.

»

Run 15 EEMC Calibrations

Updated on Fri, 2015-08-28 12:15. Originally created by skoby on 2015-08-28 12:15. Under:

EEMC Gain Calibration Using MIP Run9

Updated on Thu, 2015-04-30 15:19. Originally created by tinglin on 2014-11-21 14:08. Under:

Dead channels:
          SMD strips:        

»

EEMC Calibration Docs

Updated on Tue, 2015-06-16 14:39. Originally created by skoby on 2014-05-22 12:34. Under:

This page is meant for centralizing all EEMC calibration documents.

»

EEMC Status and Pedestal Tables

Updated on Wed, 2013-12-11 15:55. Originally created by skoby on 2013-11-18 15:20. Under:

Run List

General Procedure:

»

Run 13 EEMC Calibrations

Updated on Mon, 2013-11-18 15:19. Originally created by skoby on 2013-11-18 15:19. Under:

Uploading EEMC Pedestal, Status and Gain Calibrations to the DB

Updated on Fri, 2013-01-25 13:10. Originally created by stevens4 on 2013-01-25 13:10. Under:
 
»

Producing ADC distributions for the EMCs from raw DAQ files

Updated on Wed, 2013-08-21 09:36 by aohlson. Originally created by stevens4 on 2012-12-11 14:27. Under:

For calibrations of the EMCs (eg. pedestals, status, relative gains) it is often useful to look at raw ADC distributions from a sample of minimum bias events.
»

Calculating EEMC pedestal and status tables

Updated on Tue, 2012-12-11 14:27. Originally created by stevens4 on 2012-12-11 14:12.
 

Calculating EEMC tower ideal gains and expected MIP response

Updated on Wed, 2012-07-11 15:40. Originally created by wissink on 2012-07-11 12:56.

This is a quick summary of how one goes from a measured MIP peak to a final tower gain.

EEMC HV adjustments for "outliers"

Updated on Fri, 2011-02-11 15:08. Originally created by stevens4 on 2011-02-07 14:40. Under:

EEMC HV adjustments for "outliers"

»

Run 11 EEMC Calibrations

Updated on Mon, 2011-02-07 14:07. Originally created by stevens4 on 2011-02-07 14:06. Under:

This is the main page for all EEMC calibration information for Run 11

test entry

Updated on Wed, 2010-12-22 11:20. Originally created by stevens4 on 2010-12-22 11:20. Under: